Designing a biocompatible ear implant of a man with help of modern information technologies

  • Olena Savielieva Odessa National Polytechnic University
  • Leonid Orel South Ukrainian National Pedagogical University named after K.D. Ushynsky
  • Andrey Pavlyshko Odessa National Polytechnic University
  • Veronika Rutska Odessa National Polytechnic University
Keywords: three-dimensional solid-state model of human ear, 3D-bioprinter, 3D-bioprinting, 3D-scanner

Abstract

The article is devoted to designing a biocompatible human ear implant with the further possibility of its bioprinting. The paper considers 3D technologies used in medicine, the latest trends in the development of 3D bioprinters. The methods of modeling the human ear using the Artec Spider 3D scanner and the patient's digital image are considered. Using these methods, 3D modeling in the software package Autodesk 3ds Max and a solid 3D model of the human ear. 3D-bioprinting is an offensive step for the 3D-friend, which is widely to be visualized in medical. Through the rapid creation of high-precision products, taking into account the specifics of anatomy and pathology of the patient - improve the efficiency and quality of medical care. It will save a lot of lives and, possibly, in time, will improve the organs themselves. Getting a good three-dimensional model plays a big role in the correct form of the printed ears of the patient.

Downloads

Download data is not yet available.

References

1. Енріке Канесса. Доступний 3d друк для науки, освіти та стійкого розвитку / Енріке Канесса, Карло Фонду, Марко Дзеннаро / МЦТФ, 2013. – 195 с.

2. Ковальов В.А. Аналіз текстури тривимірних медичних зображень // Видавничий дім «Білоруська наука», 2008. – 279 с.

3. Джуліан Джонс. Біоматеріали, штучні органи і інжиніринг тканин / Джуліан Джонс, Леррі Хенч // Техносфера, 2005. – 305 с.

4. Келлі Мердок. Autodesk 3ds Max 2013. Біблія користувача Autodesk 3ds Max 2013 Bible // М.: Діалектика, 2013. – 816 с.

5. https://www.nature.com/articles/nbt.3413

6. http://www.pit.kiev.ua/3d-printed_ears_for_mice

7. http://storage.library.opu.ua/online/conference/tez_52/1/1-4.pdf
Published
2018-06-27
How to Cite
Savielieva, O., Orel, L., Pavlyshko, A., & Rutska, V. (2018). Designing a biocompatible ear implant of a man with help of modern information technologies. Transport Development, (1(2), 184-193. https://doi.org/10.33082/td.2018.1-2.18
Section
PERSPECTIVE TECHNOLOGIES FOR LIFE SAFETY AND LONG-TERM HUMAN BEINGS

Most read articles by the same author(s)